Waterjets

MJP, “the Swiss Watches of Waterjets”

/ 1 Comment / 5th September 2014

0saves

Successful sea trials of Tampa Yacht Manufacturing’s latest 50 Fast Attack Craft won high praise for the performance of MJP waterjets from the builder’s CEO Robert Stevens.

“We are very pleased with the performance of the vessel and the MJP waterjets have given a huge performance boost to an already world class design” said Stevens adding that he considers the MJP jets to be “the Swiss watches of waterjets built from high quality materials and with an exceptional standard of fit and finish.”

The 50’ Fast Attack Craft is a carbon-fibre reinforced, GRP 16.15M (53’) LOA, patrol vessel with a beam of 4.43M (14’8-1/2”). The design has been a best seller for Tampa Yacht Manufacturing and exists in multiple mission configurations. The latest craft is the first to have been equipped with MJP waterjets but retains the standard MAN R6 800HP diesel engines running at 2,350rpm, and a ZF 500 Gearbox at 1.125:1 Ratio.  The MJP 350 DRB waterjets installed are fitted with a six-blade stainless steel impeller.

During sea trials in June 2014 in Tampa Bay, Florida, the fully laden, battle-ready condition vessel reached an average top speed of 46.0 knots at full engine load and consumed 40.70 gallons of diesel per hour.  Stevens was delighted at the performance boost. “This will make the MJP jets a key component in delivering the performance our customers expect” he said.

During the trials, acceleration performance from 0-25kts averaged 23.8 seconds. Another set of acceleration trials conducted from 0-35 knots averaged 34.4 seconds. All test were conducted with the vessel fully laden total weight of 48,596 lbs (24 tonnes).

The tested vessel was the first to feature implementation of the Ultrajet control system with MJP’s stainless steel waterjets.  This implementation allows for the familiarity and ease of installation and the lower cost of the Ultrajet control system to be matched with the high performance duplex stainless steel MJP waterjets.

 

About MJP

Marine Jet Power has its head office in Sweden with production sites in Sweden and in UK. Waterjet range produced is covering and the products are offered both in stainless steel and aluminium with two different pump technologies. Marine Jet Power operates globally and has got chain of regional offices plus network of agents.

 

For more information, please contact:

Hans Andersson                                                   Jim Campbell

Executive Vice President                                    Regional Director, Americas

Global Sales and Marketing

 

Marine Jet Power Holding AB                            Marine Jet Power, Inc.

S-74801 Österbybruk                                    6740 Commerce Court Drive

Sweden                                                      Columbus, OH 43004

Direct +46 295 244 201                                 Direct (614) 759-9000

Mob   +46 70 214 0295                                  Mob   (614) 214-6727

Fax     +46 295 244 260                                Fax     (614) 759-9046

hans.andersson@marinejetpower.com                       jim.campbell@marinejetpower.com

www.marinejetpower.com                                                 www.marinejetpower.com

 

  • Landon

    Couldn’t agree more, the MPJ are indeed a work of art and they set the standards pretty high when it comes to building durable, high quality waterjets. The 50 Force Protection Craft / Fast Attack Craft is a super fast vessel and it complies with all the IACS class standards.