27 May 2019 – Keppel Shipyard in Singapore has awarded Norwegian liquid handling and pump specialist PG Flow Solutions a contract to supply high flow seawater pumps to the Gimi FLNG that is being converted at the yard.
PG Flow Solutions will deliver four large seawater pumps, each with a capacity of 5,500 cubic metres of water per hour. The contract value is undisclosed.
The seawater pumps will be used to cool down the onboard turbine steam condensers. As the LNG-fuelled vessel has steam turbines for power generation, the seawater pumps will provide continues flow of cold seawater to cool down the steam condensers and liquify the steam. The pumps will run on energy optimisation by frequency converters and are designed to be reversed to clean out the seawater circuit.
“These axial type propeller pumps represent a highly reliable technology that is just as popular in the maritime and oil and gas industries because of its low maintenance requirements. We are very proud to be involved with this prestigious FLNG project,” says Kjetil Vatne, R&D manager at PG Flow Solutions.
PG Flow Solutions AS will assemble the pumps at the company’s facility in Sande in Vestfold, Norway, and then transport them to Keppel’s yard in Singapore. The company will deliver the four large seawater pumps in the fourth quarter of 2019.
Keppel Shipyard’s scope of work is to convert Golar LNG’s Gimi Liquefied Natural Gas (LNG) carrier into an FLNG vessel. The Gimi FLNG will be customised for the 20-year BP’s Greater Tortue Ahmeyim contract offshore West Africa. Delivery of the vessel is expected in the first half of 2022.
When completed, the Gimi FLNG will be stationed at a nearshore hub located on the Mauritania and Senegal maritime border. It is designed to produce an average of approximately 2.5 million tonnes of LNG per annum.
PG Flow Solutions provides proprietary solutions, systems and products for companies within the energy, maritime, aquaculture and land-based process industries. The heritage of the business is pumps and pumping systems. The company’s headquarters and manufacturing facility is located in Sande, Vestfold, Norway. Its subsidiary Calder Ltd operates out of a similar facility in Worchester outside Birmingham, UK, while subsidiary Cflow Fish Handling AS operates out of Aalesund, Norway.
For media information, please contact:
Endre Aaberg Johansen, Corporate Communications, tel: +47 41 61 06 05, e-mail: [email protected]
Vennlig hilsen/Best regards,
Endre Aaberg Johansen | partner
Telefon: +47 41 61 06 05
E-post: [email protected]